• Direct to Film fabric transfers
• CMYK + White Ink
• Quick melt - Cold Peel
• Sizes up to 22" x 120"
• File requirements: PNG w/transparent background (300dpi recommended)

Description

Direct‑to‑Film (DTF) printing is one of the most versatile and in‑demand decoration methods today. Full‑color artwork is printed onto a transfer film and then applied to the final product using a heat press. Unlike DTG, DTF works beautifully on both polyester blends and cotton, and it produces a softer, less bulky feel compared to traditional Plastisol prints. It also opens the door to products that once required cut‑and‑weed vinyl—hats, tote bags, and virtually any fabric item.

Our transfers include white ink for crisp, contoured graphics. Each design is backed with a flood white so colors stay vibrant on both light and dark garments. Transfers are stable, easy to store, and perfect for printing now and pressing later whenever you need them.

Spec

Print

• Cold Peel Transfer Film

• 5/0 (CMYK + White ink)

• White melt adhesive

File Instructions

• PNG files only

• Artwork must have a transparent background

• Include a ⅛" safety margin on all edges to prevent trimming cutoff

• Gang multiple designs on your artboard to maximize square‑foot pricing

• 5/0 color printing

• Maximum sheet size: 22" × 120"

• Transfers trimmed to ordered size

• Minimum detail size: 0.02" (0.5 mm). Elements smaller than this may not print or adhere properly.

Pressing Instructions

(Adjust heat, pressure, and time based on your specific press and substrate.)

• Pressure: 35–50 PSI

• Pre‑press: 5–7 seconds to remove moisture

• Press: 290–320°F for 10–20 seconds

• Post‑press: 5–7 seconds with a Teflon sheet or preferred cover