Description

Rectangle flags offer a massive full color dye sublimated graphic, easy to design for shape and with optional base accessories they can be used indoors and outdoor.

Our mesh flag polyester is direct printed and then sublimated. This creates "Print thru" for single sided flags; full color and vibrant on the front - muted and mirrored but legible when viewed from the back.

• Single sided Print Thru flag graphic with black nylon pole sleeve to the left of the print when viewed from the front
• Single sided Print Thru Reverse flag graphic with black nylon pole sleeve to the right of the print when viewed from the front
• Double Sided separate flag graphics are sewn back to back with a silver block out layer in between
  
  

Brushed aluminum pole sets are quick to assemble and no tools are required.

The ground stake can be used to install in soft ground, or upgrade to a cross base or square base when a flag will be displayed on hard indoors or outdoor surfaces.

Spec

Size & Specifications

Size	Assembled Height	Graphic Size	Flag Weight	Flag w/ Pole Weight	Pole Set Pieces
Large	15'	31" x 151.5"	1.8 lbs	3.82 lbs	5 pc
Medium	11.8'	31" x 114"	1.3 lbs	3.01 lbs	6 pc
Small	8.5'	31" x 90.5"	1.1 lbs	2.48 lbs	5 pc

Material & Print Specifications
Print Method: Dye Sublimated
Graphic Material: 4 oz Polyester mesh flag
Washable: Yes

Hardware & Assembly
Pole Set: Aluminum and graphite pole set, Tool Free Interlocking poles

Base Hardware Specifications

Ground Stake

• Material: Aluminum
• Weight: 3.6 lbs
• Use: Outdoor soft ground
• Ball bearing allows flag to swivel in wind

Cross Base

• Material: Aluminum
• Weight: 6.73 lbs
• Use: Indoor/Outdoor hard surface

Water bag

• Material: Plastic
• Weight: 3 lbs empty
• Use with cross base for extra weight

Square Base

• Material: Steel
• Weight: 21.83 lbs
• Indoor/Outdoor hard surface

Flag Assembly

Position the pole set.

Step 2

Connect the poles.

Step 3

Slide flag onto the pole.

Step 4

Secure flag down the pole.

*Tip

If the flag appears wrinkled or loose after setup, please ensure the elastic cord at the bottom is pulled tight. A firm tension will help the flag stay smooth and properly displayed.